Ricoh M022 Service Manual page 699

No. Type
Log Data Error 5
• Installed NVRAM or HDD which is used in another machine
-005
1. Reinstall the previous NVRAM or HDD.
2. Initialize the HDD with SP5832-004.
Log Data Error 99
-099 • Other than the above causes
Ask your supervisor.
No. Type
SD card error
The 'all delete' function cannot be executed but the Security & Encryption Unit is
installed and activated.
CTL
877
• Defective SD card
D
• SD card not installed
1. Replace the NVRAM and then install the new SD card.
2. Check and reinstall the SD card.
No. Type
TPM system authentication error
The system firmware is not authenticated by TPM (security chip).
CTL
878
• Incorrect updating for the system firmware
D
• Defective flash ROM on the controller board
Replace the controller board.
CÓPIA NÃO CONTROLADA
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
CÓPIA NÃO CONTROLADA
SC Tables
6
697