Ricoh M022 Service Manual page 703

No. Type
Software continuity error
The software has attempted to perform an unexpected operation. However, unlike
SC 990, the object of the error is continuity of the software.
CTL
991
C
• Software program error
• Internal parameter incorrect, insufficient working memory.
This SC is not displayed on the LCD (logging only).
No. Type
Undefined error
CTL
992 Defective software program
D
• An error undetectable by any other SC code occurred
No. Type
Operation panel management records exceeded
An error occurred because the number of records exceeded the limit for images
CTL
managed in the service layer of the firmware. This can occur if there if there are too
994
many application screens open on the operation panel.
C
• No action required because this SC does not interfere with operation of the
machine.
No. Type
995 D CPM setting error
• Defective BCU
• EEPROM Replacement error
-001
1. Install the previous EEPROM.
2. Input the serial number with SP5811-004, and turn the main power switch off/
on.
CÓPIA NÃO CONTROLADA
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
CÓPIA NÃO CONTROLADA
SC Tables
6
701