Ricoh M022 Service Manual page 1045

001 Cherry Server
[Device Setting]
The NIC and USB support features are built into the GW controller. Use this SP to enable
5985
and disable these features. In order to use the NIC and USB functions built into the controller
board, these SP codes must be set to "1".
001 On Board NIC
002 On Board USB
5987 [Mech. Counter]
001 0: OFF / 1: ON
[SP print mode]
5990
Prints out the SMC sheets.
001 All (Data List)
002 SP (Mode Data List)
003 User Program
004 Logging Data
005 Diagnostic Report
006 Non-Default
007 NIB Summary
CÓPIA NÃO CONTROLADA
*CTL [0 or 1 / 0 / – ] 0: Lite, 1: Full
[0 to 2 / 0 / 1 /step]
0: Disable, 1: Enable, 2: Function limitation
When the "Function limitation" is set, "On board NIC" is
limited only for the NRS or LDAP/NT authentication.
• Other network applications than NRS or LDAP/NT
authentication are not available when this SP is set to
"2". Even though you can change the initial settings of
those network applications, the settings do not work.
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
This SP detects that a mechanical counter device is removed.
If it is detected, SC610 occurs.
CÓPIA NÃO CONTROLADA
System SP5-xxx
-
-
-
-
-
-
-
3
299