Ricoh M022 Service Manual page 694

6. Troubleshooting
No. Type
CTL
861
D
6
No. Type
CTL
863
D
No. Type
CTL
864
D
692
CÓPIA NÃO CONTROLADA
Details (Symptom, Possible Cause, Troubleshooting Procedures)
HDD: Reboot error
The HDD does not become ready within 30 seconds after the power is supplied to
the HDD.
• Loose connection
• Defective cables
• Defective HDD
• Defective controller
1. Check the connection between the HDD and controller.
2. Check and replace the cables.
3. Replace the HDD.
4. Replace the controller.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
HDD: Read error
The data stored in the HDD cannot be read correctly.
• Defective HDD
• Defective controller
1. Replace the HDD.
2. Replace the controller.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
HDD: CRC error
While reading data from the HDD or storing data in the HDD, data transmission
fails.
• Defective HDD
Replace the HDD.
CÓPIA NÃO CONTROLADA