Ricoh M022 Service Manual page 611

2. Enter the number for the test pattern that you want to print and press [OK].
3. When you want to select the single color of Magenta, Yellow or Cyan for printing a test pattern, select
the color with SP2-109-005 (2: Cyan, 3: Magenta, 4: Yellow).
4. When you want to change the density of printing a test pattern, select the density with SP2-109-006
to -009 for each color.
• If you select "0" with SP2-109-006 to -009, the color to be adjusted to "0" does not come up
on a test pattern.
5. When you are prompted to confirm your selection, touch "Yes" to select the test pattern for printing.
6. Touch "Copy Window" to open the copy window, then select the settings for the test print (paper size
etc.).
• If you want to use black and white printing, touch "Black & White" on the LCD. If you want to
use color printing, touch "Full Colour" on the LCD.
7. Press the "Start" key to start the test print.
8. After checking the test pattern, touch "SP Mode" on the LCD to return to the SP mode display.
9. Reset all settings to the default values.
10. Touch "Exit" twice to exit SP mode.
No. Pattern
0 None
1 Vertical Line (1dot)
2 Vertical Line (2dot)
3 Horizontal Line (1dot)
4 Horizontal Line (2dot)
5 Grid Vertical Line
6 Grid Horizontal Line
7 Grid Pattern Small
8 Grid Pattern Large
9 Argyle Patter Small
10 Argyle Patter Large
CÓPIA NÃO CONTROLADA
No.
12 Independent Pattern (2dot)
13 Independent Pattern (4dot)
14 Ttrimming Area
15 Hound's Tooth Check (Vertical)
16 Hound's Tooth Check (Horizontal)
17 Band (Vertical)
18 Band (Horizontal)
19 Checkered Flag Pattern
20 Grayscale (Vertical Margin)
21 Grayscale (Horizontal Margin)
22 Two Beam
CÓPIA NÃO CONTROLADA
Main SP Tables-9
Pattern
5
609