Ricoh M022 Service Manual page 422

5. System Maintenance
Pre-ACC Process Control
004
Selects the process control mode that is done before ACC.
Pattern Caluculation
005
Method
3043 [TD Adjustment Mode]
5
Repeat Number: Power ON
Specifies the maximum number of repeats of the toner density adjustment at power on.
0: Disabled, 1 to 3: Repeat number,
001
4: Repeat three times (No consumption mode)
5: Repeat three times (Toner is supplied only when the toner density is too low, and toner is
consumed only when the toner density is too dark.)
6 to 9: Disabled
Repeat Number: Initiallization
Specifies the maximum number of repeats of the toner density adjustment at the developer
initialization.
0: Disabled, 1 to 3: Repeat number,
002
4: Repeat three times (No consumption mode)
5: Repeat three times (Toner is supplied only when the toner density is too low, and toner is
consumed only when the toner density is too dark.)
6 to 9: Disabled
420
CÓPIA NÃO CONTROLADA
[0 to 2 / 2 / 1/step]
0: Not Execute
*ENG
1: Process Control
2: TC Control
[0 to 2 / 0 / 1/step]
0: FIXED
*ENG
1: INITIALIZED
2: CALCULATED
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[0 to 9 / 4 / 1 time/step]
[0 to 9 / 3 / 1 time/step]