Ricoh M022 Service Manual page 1009

CÓPIA NÃO CONTROLADA
CERT: Error
Displays a number code that describes the reason for the request for update of the
certification.
0 Normal. There is no request for certification update in progress.
1 Request for certification update in progress. The current certification has expired.
068
2 An SSL error notification has been issued. Issued after the certification has expired.
3 Notification of shift from a common authentication to an individual certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
069 CERT: Up ID
083 Firmware Up Status
085 Firm Up User Check
086 Firmware Size
087 CERT: Macro Version
088 CERT: PAC Version
089 CERT: ID2 Code
090 CERT: Subject
091 CERT: Serial Number
CÓPIA NÃO CONTROLADA
The ID of the request for certification.
Displays the status of the firmware update.
This SP setting determines if the operator can confirm the
previous version of the firmware before the firmware
update execution. If the option to confirm the previous
version is selected, a notification is sent to the system
manager and the firmware update is done with the
firmware files from the URL.
Allows the service technician to confirm the size of the
firmware data files during the firmware update execution.
Displays the macro version of the @Remote certification.
Displays the PAC version of the @Remote certification.
Displays ID2 for the @Remote certification. Spaces are
displayed as underscores (_). Asteriskes (****) indicate
that no @Remote certification exists.
Displays the common name of the NRS certification
subject. CN = the following 17 bytes. Spaces are
displayed as underscores (_). Asterisks (****) indicate
that no DESS exists.
Displays serial number for the @Remote certification.
Asterisks (****) indicate that no DESS exists.
System SP5-xxx
3
263