Ricoh M022 Service Manual page 474

5. System Maintenance
003 Monitor Interval
5417 [Access Attack]
001 Access Permissible Number
002 Attack Detect Time
5
003 Productivity Fall Wait
004 Attack Max Num
[User Authentication]
5420
These settings should be done with the System Administrator.
Note: These functions are enabled only after the user access feature has been enabled.
001 Copy
472
CÓPIA NÃO CONTROLADA
Sets the processing time interval for referencing
user ID and password information.
*CTL
[1 to 10 / 3 / 1 sec.]
Sets a limit on access attempts when an excessive
number of attempts are detected for MFP
*CTL
features.
[0 to 500 / 100 / 1]
Sets the length of time for monitoring the
frequency of access to MFP features.
*CTL
[10 to 30 / 10 / 1 sec.]
Sets the wait time to slow down the speed of
certification when an excessive number of access
*CTL
attempts have been detected.
[0 to 9 / 3 / 1 sec.]
Sets a limit on the number of requests received
for certification in order to slow down the
certification speed when an excessive number of
*CTL
access attempts have been detected.
[50 to 200 / 200 /1 attempt]
Determines whether certification is required before
a user can use the copy applications.
*CTL
[0 to 1 / 0 /1]
0: On, 1: Off
CÓPIA NÃO CONTROLADA