Ricoh M022 Service Manual page 780

3. Appendix: SP Mode Tables
Center Temp. 2
Specifies the temperature correction for the heating roller (center) when the paper width is
012
226 mm or more.
The start time of this SP can be adjusted with SP1116-019.
Ends Temp. 2
Specifies the temperature correction for the heating roller (ends) when the paper width is
013
226 mm or more.
3
The start time of this SP can be adjusted with SP1116-019.
Control Time 1
Specifies the start time of the temperature correction that is set with SP1116-010 and -011.
018
The temperature correction is added when the time specified with this SP has passed after
feeding the paper.
Control Time 2
Specifies the start time of the temperature correction that is set with SP1116-012 and -013.
019
The temperature correction is added when the time specified with this SP has passed after
feeding the paper.
022 Center Temp.1:MThick
023 Ends Temp.1:MThick
024 Center Temp.2:MThick
025 Ends Temp.2:MThick
030 Center Temp.1:Other
031 Ends Temp.1:Other
032 Center Temp.2:Other
033 Ends Temp.2:Other
1117 [Idling Time AF Heater OFF]
After Ready
001
Specifies the idling time without the lamp on after reaching the ready temperature.
34
CÓPIA NÃO CONTROLADA
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG [0 to 10 / 5 / 1 sec/step] DFU
CÓPIA NÃO CONTROLADA
[-10 to 10 / 0 / 1 deg/step]
[-10 to 10 / 0 / 1 deg/step]
[0 to 250 / 0 / 1 sec/step]
[0 to 250 / 0 / 1 sec/step]
[-10 to 10 / 0 / 1 deg/step]