Ricoh M022 Service Manual page 119

2. Install the wireless LAN board [A] (Knob-screw x 2) into the I/F-slot.
• Fasten the knob-screws firmly with a screwdriver.
3. Make sure that the machine can recognize the option (see 'Check All Connections' at the end of this
section).
4. Peel off the double-sided tapes on the Velcro fasteners [A], and then attach them at the front left of
the machine.
5. Attach "ANT1" (having a black ferrite core) [B].
6. Attach "ANT2" (having a white ferrite core) [C].
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA
Controller Options
2
117