Ricoh M022 Service Manual page 1006

3. Appendix: SP Mode Tables
RCG Write Timeout
009
Specifies the write timeout interval when calling the RCG.
[1 to 100 / 60 / 1 second /step]
RCG Read Timeout
010
Specifies the read timeout interval when calling the RCG.
[1 to 100 / 60 / 1 second /step]
3
Port 80 Enable
Enables/disables access via port 80 to the SOAP method.
011
[0 or 1 / 0 / – ]
0: Disabled, 1: Enabled
RFU (Remote Frimware Update) Timing
Selects the RFU timing.
013
[0 or 1 / 1 / – ]
0: RFU is executed whenever update request is received.
1: RFU is executed only when the machine is in the sleep mode.
RCG-C Registed
This SP displays the Embedded RC Gate installation end flag.
021
0: Installation not completed
1: Installation completed
Connect Type (N/M)
This SP displays and selects the Embedded RC Gate connection method.
023
[0 or 1 / 0 / 1 /step
0: Internet connection
1: Dial-up connection
Cert. Expire Timing DFU
061
Proximity of the expiration of the certification.
Use Proxy
062
This SP setting determines if the proxy server is used when the machine communicates with
the service center.
260
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA