Ricoh M022 Service Manual page 884

3. Appendix: SP Mode Tables
001 Paper Transfer: Standard:1st
002 Paper Transfer: Standard:2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
005 Separation DC: Standard: 1st
006 Separation DC: Standard: 2nd
3
007 Separation DC: Low: 1st
008 Separation DC: Low: 2nd
[M-Thick:Switch Timing:L-Edge] DFU
Standard: 260 mm/sec, Low: 85 mm/sec
2722
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
001 Paper Transfer: Standard:1st
002 Paper Transfer: Standard:2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
005 Separation DC: Standard: 1st
006 Separation DC: Standard: 2nd
007 Separation DC: Low: 1st
008 Separation DC: Low: 2nd
[M-Thick:T-Edge Correct] DFU
Standard: 260 mm/sec, Low: 85 mm/sec
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
2723
mode. SP2703 and SP2707 are multiplied by these SP values.
• The paper trailing edge area can be adjusted with SP2724
138
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[0 to 995 / 100 / 5% /step]
[0 to 50 / 0 / 2mm /step]