Ricoh M022 Service Manual page 973

001 Latest: GE Color
002 Latest: GO Color
[Digital Gain Adj. Display]
4633
Displays the gain value of the amplifiers on the controller for Blue.
001 Latest: BE Color
002 Latest: BO Color
4645 [Scan Adjust Error]
001 White level
002 Black level
[Scanner Hard Error]
4647
Displays the result of the SBU connection check.
001 Power-ON
[Black Level Adj. Display]
4654
RE: Red Even signal, RO: Red Odd signal
Last Correct Value: RE
001
Color
Last Correct Value: RO
002
Color
[Black Level Adj. Display]
4655
GE: Green Even signal, GO: Green Odd signal
CÓPIA NÃO CONTROLADA
-
[0 to 1023 / 0 / 1 digit/step]
-
-
[0 to 1023 / 0 / 1 digit/step]
-
-
[0 to 65535 / 0 / 1 digit/step]
-
[0 to 35535 / 0 / 1digit /step]
- 0: OK, Other: SBU connection check failure
If the SBU connection check fails, SC144 occurs.
Displays the black offset value for the even red
signal in the CCD circuit board (color printing
*ENG
speed).
[0 to 16383 / 0 / 1 digit/step]
Displays the black offset value for the odd red
signal in the CCD circuit board (color printing
*ENG
speed).
[0 to 16383 / 0 / 1 digit/step]
CÓPIA NÃO CONTROLADA
System SP4-xxx
3
227