Ricoh M022 Service Manual page 463

001 -
[ACC Data Display]
This SP outputs the final data read at the end of ACC execution.
4902
A zero is returned if there was an error reading the data.
[0 to 255 / 0 / 1 /step]
001 R DATA1
002 G DATA1
003 B DATA1
004 R DATA2
005 G DATA2
006 B DATA2
[Manual Gamma Adj]
4918
Adjusts the offset data of the printer gamma for yellow in Photo mode.
See "Printer Gamma Correction" in the Replacement and Adjustment for how to use.
009 -
[IPU Image Path Selection ]
4991
Selects the image path.
Enter the number to be selected using the 10-key pad.
CÓPIA NÃO CONTROLADA
[0 to 250 / 0 / 1 /step]
1: Grid pattern
- 2: Gradation main scan
3: Gradation sub scan
4 to 250: Default (Scanning Image)
*ENG Photo C Patch Level 1 (8-bit)
*ENG Photo M Patch Level 1 (8-bit)
*ENG Photo Y Patch Level 1 (8-bit)
*ENG Photo C Patch Level 17 (8-bit)
*ENG Photo M Patch Level 17(8-bit)
*ENG Photo Y Patch Level 17 (8-bit)
Enter the manual gamma adjustment screen (-001
to 008). For details, see the "Printer Gamma
-
Correction" in the section "Replace and
Adjustment".
CÓPIA NÃO CONTROLADA
Main SP Tables-4
5
461