Ricoh M022 Service Manual page 872

3. Appendix: SP Mode Tables
2630 [OHP: Env. Correct Table] DFU
015 Separation DC
019 Separation DC
[Thick3: Bias]
2647
Adjusts the DC voltage of the discharge plate for thick paper 3.
3
001 Separation DC: 1st
002 Separation DC: 2nd
[Thick3: Bias: BW]
2648
Adjusts the current for the paper transfer roller for thick paper 3 in black-and-white mode.
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
[Thick3: Bias: FC]
2649
Adjusts the current for the paper transfer roller for thick paper 3 in full color mode.
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
[Thick3: Size Correct: BW]
2650
Adjusts the size correction coefficient for the paper transfer roller current for each paper size.
SP2648 and SP2649 are multiplied by these SP values.
001 Paper Transfer: 1: S1
002 Paper Transfer: 2: S1
003 Paper Transfer: 1: S2
126
CÓPIA NÃO CONTROLADA
*ENG
[1 to 100 / 30 / 1 /step]
*ENG
*ENG
[0 to 6000 / 2000 / 10 -V /step]
*ENG
*ENG [0 to 230 / 9 / 1 – A /step]
*ENG [0 to 230 / 12 / 1 – A /step]
*ENG [0 to 230 / 12 / 1 – A /step]
*ENG [0 to 230 / 18 / 1 – A /step]
*ENG
[100 to 995 / 100 / 5%/step]
S1 size ≥ 194 mm (Paper width)
*ENG
[100 to 995 / 150 / 5%/step]
*ENG 194 mm > S2 size ≥ 165 mm
(Paper width)
CÓPIA NÃO CONTROLADA