Ricoh M022 Service Manual page 876

3. Appendix: SP Mode Tables
[Thick 3: Switch Timing: L-Edge] DFU
2655
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
003 Separation DC: 1st
3
004 Separation DC: 2nd
[Thick 3: T-Edge Correct] DFU
Thick 3 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
2656
mode. SP2648 and SP2649 are multiplied by these SP values.
• The paper trailing edge area can be adjusted with SP2657.
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
003 Separation DC: 1st
004 Separation DC: 2nd
[Thick 3: Switch Timing: T-Edge] DFU
2657
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
paper trailing edge between the erase margin area and the image area.
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
003 Separation DC: 1st
004 Separation DC: 2nd
[Thick 3: Env. Correct Table] DFU
2660
Thick 3 Paper: MM Environment Coefficient Adjustment
130
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[0 to 50 / 0 / 2 mm/step]
[0 to 995 / 100 / 5%/step]
[0 to 50 / 0 / 2 mm/step]