Ricoh M022 Service Manual page 910

3. Appendix: SP Mode Tables
[SP 3: T-Edge Correct] DFU
Special 3 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
mode. SP2852 and SP2857 are multiplied by these SP values.
2873
Low: 85 mm/sec
• The paper trailing edge area can be adjusted with SP2874.
3
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
007 Separation DC: Low: 1st
008 Separation DC: Low: 2nd
[SP 3: Switch Timing: T-Edge] DFU
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
2874
paper trailing edge between the erase margin area and the image area.
Low: 85 mm/sec
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
007 Separation DC: Low: 1st
008 Separation DC: Low: 2nd
[SP 3: Env. Correct Table] DFU
2880
Low: 85 mm/sec
015 Separation DC: Low: 1st
016 Separation DC: Low: 2nd
[SP 3: Edge-Env. Correct] DFU
019 Separation DC: Low: 1st
020 Separation DC: Low: 2nd
164
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[0 to 995 / 100 / 5%/step]
[0 to 50 / 0 / 2 mm/step]
[1 to 100 / 30 / 1 /step]
[1 to 100 / 30 / 1 /step]