Ricoh M022 Service Manual page 499

CÓPIA NÃO CONTROLADA
IP Address (Primary)
002
Use this SP to set the Scan Router Server address. The IP address under the transfer tab
can be referenced by the initial system setting.
Delivery Error Display Time
Use this setting to determine the length of time the prompt message is displayed when a
006
test error occurs during document transfer with the NetFile application and an external
device.
IP Address (Secondary)
Specifies the IP address assigned to the computer designated to function as the secondary
008
delivery server of Scan Router. This SP allows only the setting of the IP address without
reference to the DNS setting.
Delivery Server Model
Allows changing the model of the delivery server registered by the I/O device.
0: Unknown
009
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
010 Delivery Svr. Capability
Bit7 = 1 Comment information exits
Bit6 = 1 Direct specification of mail address possible
Bit5 = 1 Mail RX confirmation setting possible
Bit4 = 1 Address book automatic update function exists
Bit3 = 1 Fax RX delivery function exists
Bit2 = 1 Sender password function exists
Bit1 = 1 Function to link MK-1 user and Sender exists
Bit0 = 1 Sender specification required (if set to 1, Bit6 is set
to "0")
CÓPIA NÃO CONTROLADA
Range: 000.000.000.000 to 255.255.255.255
[0 to 999 / 300 / 1 second /step]
Range: 000.000.000.000 to 255.255.255.255
[0 to 4/ 0 / 1 /step]
[0 to 255 / 0 / 1 /step]
Changes the capability of
the registered that the I/O
device registered.
Main SP Tables-5
5
497