Install Sansurfer Pro - IBM TotalStorage DS300 Best Practices Manual

Figure 7-159 Device Manager with QLogic NULL Driver
16.Repeat step 10 on page 328 till step 15 on page 330 to install the NULL driver
for the remaining Ethernet Controller.
Note: In case the network functionality of the iSCSI host bus adapter is
required, the NULL driver can be upgraded with the NDIS driver.
The drivers for the iSCSI host bus adapters are now installed.

7.5.4 Install SANsurfer Pro

SANsurfer Pro is a management application for the iSCSI host bus adapter. This
software follows a client server model. Only the iSCSI agent required is required
on both cluster nodes. A management station needs the graphical user interface
of the SANsurfer Pro.
1. Download the SANsurfer Pro from the following URL:
http://www.ibm.com/support/docview.wss?uid=psg1MIGR-58619
2. Install on both cluster nodes TIBER and SEINE the SANsurfer Pro agent.
Start the setup program.
3. Gather the IQNs of the host bus adapters.
Chapter 7. TotalStorage DS300 installation
331