6. A new adapter does not have a configuration on it. It is required to define the
IP network settings first before the adapter can be used to access iSCSI
targets. Click the menu Wizard → General Configuration Wizard... or press
Ctrl+G.
Figure 7-105 Port options
7. The wizard needs to know which HBA and port has to be configured. Select a
port and click Next.
Figure 7-106 Wizard — HBA port selection
8. Verify by inspecting the HBA port data that the right HBA port was chosen.
Click Next.
294
IBM TotalStorage DS300 and DS400 Best Practices Guide