IBM TotalStorage DS300 Best Practices Manual page 117

Note: Currently the Management Station service runs only under Windows. To
manage a TotalStorage DS300 or DS400 from a Linux ServeRAID Manager
console, you need to add a remote Management Station which runs on a
Microsoft Windows operating system.
1. In the Enterprise view, right-click the icon for the Networked storage and
select Add management station, as shown below.
Figure 4-30 Add Management Station
2. The Add Management Station window opens.
3. In the Type field, select Management Station.
4. Enter the host name or TCP/IP address of the Management Station system.
In case you have no separate Management Station, and the Management
Station is running on the same system, use localhost or 127.0.0.1.
5. Enter the Management Station user name and password, as they were
defined during the ServeRAID Manager installation. (See Step 7 on page 94.)
6. Select Save user name/password. When the password is not saved, it
needs to be entered every time the ServeRAID manager is started and
access to the TotalStorage DS300 or DS400 is requested.
7. Click Connect.
Chapter 4. TotalStorage DS300 and DS400 management
99