Initiator Manage Initiator Commands - IBM TotalStorage DS300 Best Practices Manual

info [name_list]
Output information about all specified remote iSCSI initiators
Including only one initiator in the name_list list produces the same results as
using the iscsi initiators manage initiator info command (see initiator
manage initiator commands).
list
List all of the known remote FC initiators.
A.17.1 initiator manage initiator commands
These commands manage remote FC initiators. These commands are available
after the global initiator manage initiator command, from the global context
by preceding them by initiator initiator, or from the iSCSI initiators context
by preceding them with manage initiator.
Command
add
allow
deny
info
move
remove
rename
The maximum number of supported LUN mappings per FC initiator is 256. LUNs
are numbered 0-255.
add logical LUN
Map a volume to appear as LUN LUN to the specified initiator.
allow FC_port | all
Allow access to the specified initiator on the FC port FC_port, or on all ports
deny FC_port | all
Deny access to the specified initiator on the FC port FC_port, or on all ports
596
IBM TotalStorage DS300 and DS400 Best Practices Guide
Parameters Levels
logical LUN administrator
FC_Port | all administrator
FC_port | all administrator
all
old_LUN new_LUN administrator
LUN administrator
new_name administrator