IBM TotalStorage DS300 Best Practices Manual page 136

array create
S-array-1
RAID50 128 2560
2816 3072 3328
3584 3840
Figure 4-62 Array-2 with three drives
8. Select the New array tab and repeat step 6 on page 117 to create a new
array with drives ID 13, 14 and 15. See Figure 4-63.
Figure 4-63 Array-3 with three drives
9. Create two more arrays with only two drives in each. Use the drives with ID 2
and 3 in Array-4 and drives with ID 4 and 5 in Array-5. This arrays will be
used together to build a spanned array with a RAID level 10. Refer to the
previous steps on how to add drives. The final results are shown in
Figure 4-64 on page 119.
118
IBM TotalStorage DS300 and DS400 Best Practices Guide