Initiator Commands (Iscsi) - IBM TotalStorage DS300 Best Practices Manual

Hide thumbs Also See for TotalStorage DS300:

Table of Contents

Upload a new image to be used the next time the unit is rebooted. If the upload is

successful the new image will be used the next time the unit is booted and the

current image is set as the alternative.

The url option gives the URL which the unit will access to download the new

image. The url can take any of the common formats:

http:// host:port/pathname

http:// host/pathname

ftp:// host/pathname

A.16 Initiator commands (iSCSI)

Note: For information about initiator commands for FC, see Initiator

Commands (FC).

These commands are used to manage remote iSCSI initiators. They are

available after the initiator global command, or as global commands by

preceding them by initiator.

Note: Remote iSCSI initiators are also implicitly created by other commands

create name iqn [align boolean] [piggyback boolean] [ping

Create a new remote iscsi initiator with the local name where iqn is the IQN of

that initiator.

Name iqn [ options ]

initiator_list

[ initiator_list ]

initiator (See initiator manage initiator commands)

Appendix A. Command line interface reference

administrator

Totalstorage ds400