IBM TotalStorage DS300 Best Practices Manual page 317

Figure 7-114 iSCSI HBA network settings
5. Select the register card Target Settings and select the Auto discover option.
Save the settings by clicking Save settings. To save settings enter the
password.The default password is config. Click the Refresh button. This
allows you to get the a list of iSCSI targets from the iSNS server.
Figure 7-115 iSCSI target list
6. After a moment, the target list is updated with iSCSI targets from the iSNS
server updated iSCSI target list.
Chapter 7. TotalStorage DS300 installation
299