IBM TotalStorage DS300 Best Practices Manual page 153

array create
S-array-1
RAID50 128
65536 65792
66048 66304
66560 66816
Figure 4-92 Array-3 with three drives
8. Select the New array tab and repeat step 6 on page 134 to add three drives
with the IDs 3, 4 and 5 into a new array.
9. Create two more arrays with only two drives in each. Use drives with ID 12
and 13 for the first array and ID 14 and 15 for the second array. Refer to the
previous steps on how to add drives. The final results are displayed in
Figure 4-93.
array create
S-army-2
RAID10 256 3072
3328 3584 3840
Figure 4-93 Array-5 with two drives
10.Click the Spares tab to create global hotspare drives. See Figure 4-94 on
page 136.
Chapter 4. TotalStorage DS300 and DS400 management
135