IBM TotalStorage DS300 Best Practices Manual page 135

array create
Array-1 RAID1
65536 65792
Figure 4-60 Array-1 with two assigned drives
6. Click the newly created tab New array. Select drives with the ID 10, 11 and
12 and assign them to New array. This array will be used together with the
array created in the next step to build a spanned array with a RAID level 50.
Click the Add selected drives to array button. See Figure 4-61.
Figure 4-61 Selected drives for the new Array-2
7. The selected drives will be added to the new array and the array is named
Array-2. A new tab named New array is created. Figure 4-62 on page 118.
Chapter 4. TotalStorage DS300 and DS400 management
117