Create Ibm Ds4000 Host Bus Adapter Driver Disk - IBM TotalStorage DS300 Best Practices Manual

Figure 9-117 Modifications
i. Do not reboot the system until the driver for the HBA is ready.
6. The HBAs are now configured for the Installation of Microsoft Windows
Server 2003. Each logical drive of the TotalStorage DS400 is seen by the host
only once, even with multiple paths.

9.2.5 Create IBM DS4000 Host Bus Adapter driver disk

The driver disk is required because the driver included on the Microsoft Windows
Server 2003 Enterprise Edition CD is out of date.
1. Create the driver disk for the TotalStorage DS4000 FC2-133 host bus adapter.
Download the driver for the TotalStorage DS4000 FC2-133 host bus adapter
from the QLogic Web site. Use the software and driver matrix of the DS400 to
get the right driver for the host bus adapter in combination with the
TotalStorage DS400.
http://www.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MI
GR-58619
Unzip the driver archive and store all files in the root of a 3.5" diskette. This
diskette will be required to install Microsoft Windows Server 2003.
2. Proceed with the installation of Microsoft Windows Server 2003 as described
in the next section.
528
IBM TotalStorage DS300 and DS400 Best Practices Guide