Service Commands; Show Option Command - IBM TotalStorage DS300 Best Practices Manual

add logical_drive _list
Add the list of logical drives to the current scope.
info
Output information about the scope and its logical drives.
remove logical_drive _list
Remove the logical drives in the logical_drive_list list from the scope.
A.31 Service commands
This command produces details about the services running on the system. It is
available after the global service command or may be used as a global
command by preceding it with service.
Command
info
info
Output details about the services. The information output will include:
Name
Status
A.32 Show option command
Use this command to display information about various parts of the system.
These are the valid values for this option:
all
arrays
authentication (iSCSI only)
cache
devices
events
Parameters Levels
All
Use this value to ask for all the other options in this list
The same as array_info
The same as authentication list
The same as cache info
The same as device list
The same as events info
Appendix A. Command line interface reference
613