IBM TotalStorage DS300 Best Practices Manual page 107

interface
manage eth3[A]
ip 192.168.1.125
interface
manage eth3[A]
netmask
255.255.255.192
interface
manage eth3[A]
broadcast
Figure 4-16 Ethernet port ETH3[A] settings
192.168.1.127
5. Right-click controller A to open the context menu. Select from the context
menu Configure ethernet port → ETH 2 (iSCSI).
interface
manage eth2[B]
info
Figure 4-17 Configure ethernet port ETH2 controller B
6. Enter the IP address 192.168.1.62, subnet mask 255.255.255.192 and
broadcast address 192.168.1.63 into the dialog. Click OK. The settings
become immediately effective.
Chapter 4. TotalStorage DS300 and DS400 management
89