Array Manage Array Commands - IBM TotalStorage DS300 Best Practices Manual

Command
rate
array verify start | stop
Begins a parity check and corrects parity information where deficient. All arrays
are checked.
array verify status
Indicates whether a verification check is in progress, and reports the speed at
which it is running.
array verify rate high | low | medium
Sets the speed of a running verification check.
A.5.2 Array manage array commands
These commands control a specific array. They are available after the global
array manage array command, or as global commands by preceding them with
array manage array, or from the array context by preceding them by manage
array.
Command
cache
identify
info
spare
task abort
task rate
verify
identify [start | stop]
Blink the LEDs of the disks which make up this array.
580
IBM TotalStorage DS300 and DS400 Best Practices Guide
Parameters
high | low | medium
Parameters
read enable | disable
[start | stop]
add unused_device_list | list | remove device_list
high | medium | low
Levels
administrator
Levels
administrator
administrator
all
all
administrator
administrator
administrator