IBM TotalStorage DS300 Best Practices Manual page 247

See Appendix C, "How to get updates of code and documentation" on
page 623. At time of writing the supported BIOS level was 1.47. The readme
file of this update contains the details how the update must be performed.
2. During POST, the BIOS of the QLogic iSCSI Expansion Card for
IBM ^ BladeCenter shows a message Press Ctrl+Q for Fast!UTIL.
Press CTRL+Q to enter the setup.
Note: ALT+Q works as well.
QLogic iSCSI Expansion Card for IBM ^ BladeCenter
Figure 7-2 POST —
BIOS message
3. Select the second HBA and press Enter.
Chapter 7. TotalStorage DS300 installation
229