Snapshot Manage Logical Commands; Snmp Commands; System Commands - IBM TotalStorage DS300 Best Practices Manual

A.34.1 snapshot manage logical commands
These commands manipulate the attributes of the specified snapshot logical
drive. They are available after the snapshot manage logical command. They can
also be run as global commands by preceding them with snapshot manage
logical or by just manage logical from the snapshot context.
Many of these commands are actually logical manage logical commands that
can be applied to snapshot logical drives as well as to non-snapshot logical
drives. See logical manage logical commands for detailed information.
Command
growby
growto
info
rename
A.35 SNMP commands
The SNMP command should not be used. SNMP should be configured using
ServeRAID Manager on the Management Station.
A.36 System commands
These commands set various aspects of the system. They are available after the
system command has been typed. They can also be run as global commands by
preceding them with system.
Command
date
defaults
halt
info
keyboard
reboot
618
IBM TotalStorage DS300 and DS400 Best Practices Guide
Parameters Levels
size administrator
size administrator
all
new_name administrator
Parameters
absolute_date | relative_period
layout
Levels
administrator
administrator
administrator
All
administrator
administrator