IBM TotalStorage DS300 Best Practices Manual page 146

initiator create
COLORADO-P1
iqn.2000-04.com
.qlogic:qmc4052
.zj1ve454f01y.2
Figure 4-80 IQN of the second port of the iSCSI HBA
26.A new and empty Add iSCSI initiator dialog opens. Click Cancel to leave
this dialog.
27.Click Next as shown in Figure 4-81.
Figure 4-81 Defined iSCSI initiators and aliases
28.Assign the logical drive to the alias of an IQN. This will restrict the access to
the selected logical drive to an iSCSI initiator with this IQN. When CHAP
authentication is specified for this logical drive, a username/password pair is
required together with the correct IQN to access this logical drive. A logical
drive assigned to the Unrestricted tab can be accessed by any iSCSI initiator.
When a logical drive is assigned to more than one IQN, a warning in red is
shown explaining to how many IQNs the logical drive is assigned.
128
IBM TotalStorage DS300 and DS400 Best Practices Guide