IBM TotalStorage DS300 Best Practices Manual page 345

Figure 7-152 Hardware update wizard — Completing the wizard
7. The Network Controller will disappear under other devices and show up in the
SCSI and RAID controllers section.
Figure 7-153 Device Manager with installed QLogic iSCSI Adapter
8. Repeat step 2 on page 324 till step 7 for the second Network Controller in the
Device Manager under other devices.
9. Both network controllers are installed. Install now the driver the Ethernet
Controller. Depending on the planned usage two different drivers can be
installed. The storport driver package contains a dummy driver for the
ethernet controller in case the network interface of this iSCSI host bus
Chapter 7. TotalStorage DS300 installation
327