IBM TotalStorage DS300 Best Practices Manual page 160

21.The dialog shown in Figure 4-105 on page 142 is used to discover new
initiators, add or manage existing initiators. Click the Discover new initiators
button.
Figure 4-105 Discover new initiators
22.When new initiators are found, a dialog box opens with the discovered
initiators. See Figure 4-106. Select a world wide port name (WWPN) from the
Port Name drop down list. The default initiator alias is discovered-x. Assign a
meaningful initiator alias to the initiator and click OK.
Figure 4-106 Discovered initiator
23.Repeat steps 21 on page 142 and 22 until all initiators are defined. An error
message informs when no more initiators are available. See Figure 4-107.
142
IBM TotalStorage DS300 and DS400 Best Practices Guide