IBM TotalStorage DS300 Best Practices Manual page 468

Figure 9-1 Configuration setup
The setup has used a few names which will be found in the various screenshots.
They are:
System name is RIOGRANDE.
First host bus adapter (HBA1), IBM SMB Host Bus Adapter, is installed in slot
3 and is detected by IBM FAStT MSJ as port 0. The world wide name has got
the alias RIOGRANDE-S3-(0) assigned. This HBA has access to FC0 from
controller A and B. Port FC0 as described on the rear site of the TotalStorage
450
IBM TotalStorage DS300 and DS400 Best Practices Guide