IBM TotalStorage DS300 Best Practices Manual page 200

----[ IBM DS300: Command Line Interface ]----------------------------------
Peer controller status: Ready
DS300-1[A]> administrator
Administrator level password: ********
DS300-1[A]# image info
----[ System firmware images ]---------------------------------------------
Next boot image: [1] [IBM TotalStorage DS Series (Build 0750)]
DS300-1[A]#
Figure 4-164 Command line interface — Logon and boot image information
5. Start the firmware update with the command image upload 1kxmodem.
Confirm with yes that the inactive firmware page will be overwritten. When the
first C is shown as in Figure 4-165 on page 183 click menu Transfer → Send
File from Hyperterminal. See Figure 4-166 on page 183
182
IBM TotalStorage DS300 and DS400 Best Practices Guide
Copyright: IBM (c)2003-2004
Firmware: IBM TotalStorage DS Series (Build 0750)
[27/07/2005][6.21]
Typing 'help': provides an overview of the commands available to
configure the controller.
TAB key: use the TAB key as a means of getting assistance
in completing any commands that you issue.
Image [1]: [IBM TotalStorage DS Series (Build 0750)]
[27/07/2005][6.21]
Image [2]: [IBM TotalStorage DS Series (Build 0710)]
[23/06/2005][6.04]
Current image: [1] [IBM TotalStorage DS Series (Build 0750)]