IBM TotalStorage DS300 Best Practices Manual page 610

Note: If the image_name of the available images is not unique, the
image_number must be used.
info
Display information about the current images. This is the same as the show
images command.
----[ System firmware images ]------------------------------
Image 1 name:
Build date:
Image 2 name:
Build date:
Current image:
Image to use at the next boot:
list
List the names and numbers of the available images. The list consists of lines in
this format:
[1]
where the number in the square brackets [ ] is the image number (in this
example, 1), and the text is the image's name (in this example,
SWR-00031{Z.A}).
upload 1kxmodem
Upload a new image to be used the next time the unit is rebooted. If the upload is
successful the new image will be used the next time the unit is booted and the
current image is set as the alternative.
Issue the 1kxmodem command to start the transfer
→ select Send from the terminal application menu (Hyperterminal).
592
IBM TotalStorage DS300 and DS400 Best Practices Guide
SWR-00031--1{Z.AA}
SWR-00031-01{Z.AA}
11/11/02
SWR-00031-01{2.01}
29/10/02
[1] SWR-00031-01{Z.AA}
[1] SWR-00031-01{Z.AA}