Port Manage Port Commands; Quit Command; Route Commands - IBM TotalStorage DS300 Best Practices Manual

A.26.1 Port manage port commands
These commands manipulate the attributes of the specified port. They are
available after the port manage port command, or as global commands by
preceding them with port manage port or manage port from the port context.
Command
alpa
info
speed
topology
alpa AL_PA | enable | disable
Configure the hard AL_PA (Arbitrated Loop Port Address) of the specified port, or
enable or disable its use. The change will take effect after a system reboot.
info
Get information about the managed port.
topology topology
Configure the topology of the specified port.
The permissible values are auto, f_port, fl_port, and loop.
The change will take effect after a system reboot.
A.27 Quit command
Exit the CLI.
A.28 Route commands
These commands control static routes. They are available after the global route
command. They may also be used as global commands by preceding them by
route.
Command
add
610
IBM TotalStorage DS300 and DS400 Best Practices Guide
Parameters
AL_PA enable | disable
1g | 2g | auto
topology
Parameters Levels
parameters administrator
Levels
administrator
all
administrator
administrator