IBM TotalStorage DS300 Best Practices Manual page 616

info [interface_list]
Output details about the specified interfaces including statistics. If no
interface_list parameter is supplied, the details about all of the interfaces are
output.
See the interface manage commands for more information.
list
Output a list of the known interfaces and their state.
statistics [interface_list]
Output statistics about the specified interfaces. If no interface_list parameter
is supplied the statistics for all of the interfaces are output.
See statistics for more information about what is displayed by this command.
interface manage commands
Use commands to manage network interfaces. These commands are available
after the interface manage interface global command, and can also be run as
global commands by preceding them by interface manage interface, or from
the interface context by preceding them with manage interface.
Note: If DHCP is enabled for the interface, these commands may store values
that will be used when DHCP is disabled. They do not override the values
supplied by DHCP.
Command
broadcast 2
dhcp
down
failback
info
ip 1
mtu
netmask 1
rename
598
IBM TotalStorage DS300 and DS400 Best Practices Guide
Parameters Levels
broadcast administrator
enable | disable administrator
administrator
administrator
all
ip_address [ip_mask ] administrator
mtu administrator
netmask administrator
name administrator