Ibm Serveraid Manager Removal On Microsoft Windows - IBM TotalStorage DS300 Best Practices Manual

9. A message will tell when all enclosures are updated and a reboot is required.
Perform a reboot during a period of inactivity or off-hour to activate the new
firmware code.
Figure 4-180 Update finished, reboot required
4.13 IBM ServeRAID Manager removal on Microsoft
Windows
To uninstall a already installed IBM ServeRAID Manager perform the following
steps:
1. Go to Start → Settings → Control Panel → Add or Remove Programs.
2. Select ServeRAID Manager in Change or Remove Programs.
3. Click the Remove button.
Figure 4-181 Add and Remove Programs
4. Click Yes to confirm that you want to remove the IBM ServeRAID Manager.
190
IBM TotalStorage DS300 and DS400 Best Practices Guide