Serveraid Manager Requirements - IBM TotalStorage DS300 Best Practices Manual

something which can be understood by the ServeRAID Manager console. The
ServeRAID Manager console converts this output again to present this in a
readable format for the user like the event log. Management Station software is
available from the Adaptec Web site at the following URL:
http://www.adaptec.com/
Important: As of 1 December, 2005, the ServeRAID Manager CD will no
longer include the Management Station software. Management Station
software will be a separate download from the Adaptec Web site.
Management Station, Flashcopy agent and ServeRAID Manager agent run as
services on the system where the ServeRAID Manager is installed.

4.3.2 ServeRAID Manager requirements

To manage a TotalStorage DS300 or DS400, ServeRAID Manager requires two
components:
Management Station service
Client station or console
The Management Station service is a new feature released together with the
TotalStorage DS300 and DS400. The Management Station is required for
network attached storage and communicates over an IP network connection with
the DS300 and DS400 subsystems. Previous ServeRAID Manager could only
manage direct attached storage.
Management Station system requirements
To successfully install and run the Management Station, you need:
PC with an Intel-compatible 500 MHz processor (IA32, AMD32 or AMD64)
a minimum of 256 MB RAM
35 MB hard disk drive space
Microsoft Windows Advanced Server 2003, Windows XP, or Windows 2000
Client station system requirements
To successfully install and run an IBM ServeRAID Manager client station, you
need:
PC with an Intel-compatible 500 MHz processor (IA32, AMD32 or AMD64)
a minimum of 256 MB RAM
35 MB hard disk drive space
74
IBM TotalStorage DS300 and DS400 Best Practices Guide