Note: Press F5 to get a refreshed view. It is recommended to refresh the
view from time to time. The view is not automatically refreshed in many
conditions!
2. Right-click the TotalStorage DS400 enclosure in the enterprise view. Select
Configure storage from the content menu or click the Create logical drive
button in the Logical devices column. This function is also accessible from
menu Action → Configure storage.
Figure 4-87 SRM with no configured logical drives or arrays
3. Verify that Create logical drive is selected as shown in Figure 4-88 on
page 133 and click Next.
132
IBM TotalStorage DS300 and DS400 Best Practices Guide