Ibm Iscsi Server Adapter Driver Installation - IBM TotalStorage DS300 Best Practices Manual

After installation is complete install Service pack 1 and all remaining drivers See
7.4.3, "IBM iSCSI Server Adapter driver installation" on page 311 about installing
drivers for the IBM iSCSI Server Adapter.
For operating system installation instructions see the IBM support Web site.
Appendix C, "How to get updates of code and documentation" on page 623
describes how to find operating system instructions for other
IBM ^xSeries server.

7.4.3 IBM iSCSI Server Adapter driver installation

For each physically installed IBM iSCSI Server Adapter there will appear two
devices in the Other devices tree of the device manager:
Ethernet Controller (function 0)
– This device refers to the gigabit ethernet adapter functionality of the IBM
iSCSI Server Adapter.
– After driver installation it will appear in the Network adapters tree of the
device manager.
Network Controller (function 1) - this refers to the iSCSI
– This device refers to the iSCSI adapter functionality of the IBM iSCSI
Server Adapter.
– After driver installation it will appear in the SCSI and RAID controllers
tree of the device manager.
The driver for the IBM iSCSI Server adapter is not included on the Microsoft
Windows product CD. The drivers can be found via the following URL:
http://www.ibm.com/servers/storage/support/disk/ds300/downloading.html
To install the drivers for the IBM iSCSI Server Adapter follow these steps:
1. Open the Device Manager. Depending on the number of physically installed
IBM iSCSI Server Adapters there are multiple devices in the Other devices
tree. Right-click the first Ethernet Controller in the Other devices tree. Click
Update Driver....
Chapter 7. TotalStorage DS300 installation
311