IBM TotalStorage DS300 Best Practices Manual page 313

Hide thumbs Also See for TotalStorage DS300:

Table of Contents

Figure 7-107 Wizard — HBA port information

9. Select Use the following IP address and set the IP address, subnet mask

and gateway for this iSCSI HBA port. Select Use the following DNS server

address and specify a DNS server. Click Next.

Note: A DNS server is required when iSCSI targets will be discover by

using the service location protocol (SLP).

Figure 7-108 Wizard — HBA port connection settings

Chapter 7. TotalStorage DS300 installation

Totalstorage ds400