Premium Feature License Keys - IBM TotalStorage DS300 Best Practices Manual

The IBM DS400 can be used in a split configuration with a single controller
DS400 model 1700-1RS. See the EXP400 hardware maintenance manual for
jumper settings for split configuration of the EXP400.
http://www.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MI
GR-53436
Refer to the following documents for more information about the EXP400
Storage Expansion Units:
Hardware Maintenance Manual and Troubleshooting Guide
Installation Guide
User's Guide
All of these documents are available at the following URL:
http://www.ibm.com/pc/support/site.wss/quickPath.do?quickPathEntry=1733
See 4.10, "Install premium feature license key" on page 167 for installing the
feature key.

3.6 Premium feature license keys

Certain IBM DS300 and DS400 premium features require an additional
key
to activate the feature. A premium feature allows use of additional functions
in the IBM TotalStorage DS300 and DS400. These additional features are:
more than 4 Flashcopys
With this feature, up to 256 Flashcopys can be supported for a single
controller. This feature requires purchase of a 1 Gbyte system memory
upgrade for the controller.
support for the EXP400 expansion unit with an IBM DS400 subsystem
The EXP400 expansion unit is supported on single and dual controller IBM
DS400 subsystems. To be able to see the drives in the EXP400 enclosure, or
the enclosure itself, a license key is required.
When a premium feature is purchased, a booklet with a
is included. This booklet also contains documentation on the procedure to follow
to retrieve the
with the Flashcopy premium feature. The booklet included for an EXP400 license
is the same except for the EXP400 label.
54
IBM TotalStorage DS300 and DS400 Best Practices Guide
license ke
y. Figure 3-17 on page 55 shows the booklet included
license
purchase validation code