IBM TotalStorage DS300 Best Practices Manual page 352

specify the IP address or the host name of the host system running the
SANsurfer iSCSI agent.
Figure 7-167 SANsurfer — Connect to host
2. Connect also to host TIBER.
3. Both cluster nodes are connected now.
Figure 7-168 SANsurfer — Connected cluster nodes
4. Configure the network setting of all four host bus adapters.
5. Select Port 0 of HBA0 of host SEINE. Select register card Port Options and
then Network. Enter the IP address 192.168.1.9, subnet mask
255.255.255.192 and gateway 192.168.1.62 of the first host bus adapter in
334
IBM TotalStorage DS300 and DS400 Best Practices Guide