IBM TotalStorage DS300 Best Practices Manual page 171

Figure 4-123 Menu Action
2. Select the Increase logical drive capacity and click Next.
Figure 4-124 Select an option
3. The capacity of the logical drive WOLGA-BOOT after expansion has to be 20GB.
Additional space of 10GB is required. Enter the amount of space the logical
drive will be extended on in the Additional (MB) field. Then click Next.
Note: The capacity unit depends on the display preferences and might be
changed in File → Preferences register tab Display option.
Chapter 4. TotalStorage DS300 and DS400 management
→
Increase logical drive capacity
153