IBM TotalStorage DS300 Best Practices Manual page 592

The Setup Wizard steps you through a set of questions. In addition to typing in
the answers to the questions, you can also use three commands, as shown in
this Table:
Command
Abort
Back
Help
If a question has a predefined or default answer, the answer appears in square
brackets [ ]. Some options take an arbitrary string, in which case the commands
back and abort cannot be used. In those circumstances, enclose the answer in
double-quotes " " so that the answer will be accepted even if it is the same as a
command.
hostname
Supply the name by which the system is to be known.
The special BACK command here repeats this prompt.
domain name
Supply the domain in which the system belongs.
SAN name
Supply the Storage Area Network in which the system belongs.
timezone
Supply the system time zone.
system Date
Supply the system date. The format is as for the absolute_date (see absolute
date).
define administrator password
Define whether an administrator password is required. If a password is required,
you are prompted for that password, which must be supplied twice.
Press Ctrl to leave the password unchanged.
574
IBM TotalStorage DS300 and DS400 Best Practices Guide
Function
Quit the Setup Wizard without changing anything
Go to previous question
Describe the current options